Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   - 17:37. Panels of finishing of the dashboard
      17.37.2. The lower panel of finishing from the driver
      17.37.3. Casings of a steering column
      17.37.4. Lower panel of finishing of a combination of devices
      17.37.5. Top panel of finishing of a combination of devices
      17.37.6. Lighting switching block
      17.37.7. Radio receiver pocket
      17.37.8. Ware box
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


17.37.3. Casings of a steering column

Removal

Removal of the lever of the regulator of a tilt angle of a steering column

Removal of a cap from the screw of fastening of a casing of a steering column

Vyvinchivany fastenings of a casing of forward screws of a steering column

Unscrewing of three screws of fastening of a casing of a steering column

Removal of the lower casing of a steering column

Removal of the top casing of a steering column

PERFORMANCE ORDER
1. On models with adjustment of a tilt angle of a steering column establish a steering column in the top situation and unscrew the regulator lever (see rice. Removal of the lever of the regulator of a tilt angle of a steering column).
2. Consistently turn a steering wheel for access to screws of fastening of a casing of a steering column which are closed by plastic caps.
3. Remove a cap and unscrew the screw of fastening of a casing of a steering column, then turn a steering wheel, remove the second cap and unscrew the second screw of fastening (see rice. Removal of a cap from the screw of fastening of a casing of a steering column, Vyvinchivany fastening of a casing of forward screws of a steering column).
4. Unscrew three screws of fastening located from the lower party of a casing of a steering column then remove the lower and top casings (see rice. Unscrewing of three screws of fastening of a casing of a steering column, Removal of the lower casing of a steering column, Removal of the top casing of a steering column).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal, but at the same time check that protective covers of switches were established in grooves in the top casing.