Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


17:41. Seat belts

SEAT BELT OF FORWARD SITTING

Removal

Unscrewing of a bolt of fastening of an inertial drum to the central rack

PERFORMANCE ORDER
1. Open a forward and back door and remove consolidation of a door from the central rack of a body.
2. Remove the lower panel of finishing of the central rack for access to an inertial drum.
3. Unscrew a bolt and take an inertial drum of a seat belt from the central rack (see rice. Unscrewing of a bolt of fastening of an inertial drum to the central rack).
4. Remove a decorative slip and unscrew a bolt of the top fastening of a seat belt to a body rack.
5. Unscrew the lower fastening of a seat belt and remove a seat belt assembled from the car.
If necessary unscrew the seat belt lock from sitting.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. If the mechanism of adjustment of height of the top fastening of a seat belt was removed, establish it so that shooters were directed up.

BELT OF BACK SITTING

Removal

Arrangement of the lower bolt of fastening of a back seat belt on the Hatchback models

Removal of the top fastening of a back seat belt from a body rack on the Hatchback models

Arrangement of an inertial drum of a back seat belt on the Hatchback models

Arrangement of bolts of fastening of the regulator of provision of the top fastening of a back seat belt

PERFORMANCE ORDER
1. For access to the lower bolts of fastening of a seat belt turn off a pillow of back sitting forward or remove it. Remove a rug and unscrew to a sootvetstvo a yushchy bolt from a floor (see rice. An arrangement of the lower bolt of fastening of a back seat belt on the Hatchback models).
2. Remove a decorative slip and unscrew a bolt of the top fastening of a seat belt to a back rack of a body (see rice. Removal of the top fastening of a back seat belt from a body rack on the Hatchback models).
3. Open the corresponding back door and remove consolidation of a door from a back part of a doorway.
4. On the Hatchback models unscrew the screws fixing the top back quarter of the panel of finishing to a car body. On the right side for access to screws open a box cover for a first-aid kit/sign of an emergency stop. Remove the top back quarter of the panel of finishing.
5. Unbend a forward edge of the lower back quarter of the panel of finishing of a body. On the Sedan models the panel is fixed by clamps, and on the Hatchback models screws.
Remove the panel of finishing of the lower back quarter for access to an inertial drum of a seat belt (see rice. An arrangement of an inertial drum of a back seat belt on the Hatchback models).
Unscrew a bolt of fastening of an inertial drum, remove an inertial drum and take a seat belt assembled from interior of the car.
If necessary, unscrew bolts and remove the regulator of provision of the top fastening of a back seat belt (see rice. Arrangement of bolts of fastening of the regulator of provision of the top fastening of a back seat belt).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At installation of the regulator of provision of the top fastening of a seat belt of an arrow on the regulator have to be directed up.