Opel Vectra A

since 1988-1995 release

Repair and operation of the car


Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
- 3. Repair of DOHC engines
   3.2. General information
   3.3. Removal and installation of the engine
   3.4. Replacement of support of the power unit
   + 3.5. Gear belt, pulleys, pulley of the mechanism of a tension and intermediate pulley
   3.6. A gear belt with the automatic mechanism of a tension
   3.7. Forward sealing ring of the camshaft
   3.8. Camshafts
   3.9. Installation of a head of the block of cylinders on the engine installed in the car
   3.10. Installation of a head of the block of cylinders on the engine removed from the car
   3.11. Repair of a head of the block of cylinders
   3.12. Hydraulic pushers of valves
   3.13. Replacement of a forward sealing ring of a bent shaft
   3.14. Oil pallet
   3.15. Oil pump
   3.16. Oil heater
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


3.13. Replacement of a forward sealing ring of a bent shaft
GENERAL INFORMATION

Replacement of a forward sealing ring of a bent shaft is made similarly, as well as on the SOHC engine (see subsection 2.25), taking into account the next moments...

PERFORMANCE ORDER
1. Before installation of a sealing ring it is necessary to remove an intermediate ring from a bent shaft.
2. After installation of a new sealing ring apply a thin film of sealant on the surface of the oil pump on which the sealing ring will nestle, then establish an intermediate ring on a bent shaft.
3. Replace a gear belt.
4. Establish a back casing of a gear belt, a gear belt and adjust a tension of a gear belt.