Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of the air coming to the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator of vapors of fuel (l models 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and installation of the carburetor
   6.14. Adjustment of turns of idling and contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary camera
   6.17. Economizer diaphragm
   6.18. Accelerating pump
   6.19. Knot of the air automatic gate
   + 6.20. Vacuum blocks of movement of the air automatic gate
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (automatic transmission)
   6.24. Valve check of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


6.11. Accelerator cable

Removal

Unscrewing of the screw of fastening of an air chamber

Removal of a bracket of fastening of a cover of a cable of an accelerator to an arm

Removal of a sealing ring of a cable of an accelerator from an arm

PERFORMANCE ORDER
1. On early models remove the air filter. On later models disconnect an air duct from the air filter. Then disconnect a vacuum tube and a hose of ventilation of a case from an air chamber. Unscrew three screws and remove an air chamber together with an air duct (see rice. Unscrewing of the screw of fastening of an air chamber).
2. Remove a bracket, the fixing accelerator cable cover to an arm on the carburetor, then remove a sealing ring from an arm (see rice. Removal of a bracket of fastening of a cover of a cable of an accelerator to an arm, Removal of a sealing ring of a cable of an accelerator from an arm).
3. Remove an accelerator cable from the lever of a butterfly valve on the carburetor.
4. In interior of the car remove the lower panel of finishing in deepening for the driver's legs.
5. Remove an accelerator cable cover from an arm on the top part of a pedal and disconnect a cable from an accelerator pedal.
6. Take an accelerator cable in a motor compartment.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal taking into account the next moments.
2. Check correctness of an arrangement of a cable of an accelerator.
3. Check that the sealing ring of a cover of a cable of an accelerator is correctly established in an opening of a partition of a motor compartment.

Adjustment

Arrangement of the persistent screw of a pedal of an accelerator

PERFORMANCE ORDER
1. Believe work of a butterfly valve and, if necessary, adjust an accelerator cable.
2. Two adjustments of a cable of an accelerator are applied. The first is a persistent screw on the pedal lever, for adjustment of provision of completely released accelerator pedal (see rice. Arrangement of the persistent screw of a pedal of an accelerator). The second – the bracket fixing an accelerator cable cover in an arm on the carburetor is intended for adjustment of sagging of a cable.
3. The cable of an accelerator has to be adjusted so that at completely released accelerator pedal the cable of an accelerator had small sagging from the carburetor.
4. Check that at completely pressed accelerator pedal the butterfly valve completely opens. Adjustment of a cable of an accelerator is made by shift of the bracket fixing an accelerator cable cover to an arm of the carburetor and the persistent screw of the limiter of a pedal of an accelerator.