Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
- 9. Fuel systems of the diesel engine
   9.2. General information
   9.3. Case of the air filter
   9.4. Accelerator pedal
   9.5. Fuel level sensor
   9.6. Fuel tank
   9.7. Heater of the fuel filter
   9.8. Discharge of water from the fuel filter
   9.9. Filling and pumping of fuel system
   9.10. Check and adjustment of the maximum turns
   9.11. Check and adjustment of turns of idling
   9.12. Electromagnetic valve of a stop of the engine
   9.13. Fuel pump of high pressure
   9.14. Check and adjustment of the moment of injection of fuel
   9.15. Fuel nozzles
   9.16. Turbocharger
   9.17. Heat exchanger
   9.18. Inlet collector
   9.19. Final collector
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


9.9. Filling and pumping of fuel system

GENERAL INFORMATION

Prevention

Fuel should not get on cooling system hoses. Otherwise, immediately, clear hoses.


After any separation of fuel system air which needs to be removed can get to it. In case of full fuel use from the fuel tank it is not obligatory to fill in completely the fuel tank and to pump over fuel system. It is enough to add fuel in the fuel tank and to start the engine a starter at completely pressed accelerator pedal. After start of the engine slightly increase idling turns for the end of process of pumping of fuel system.

If the engine is not started because of formation of air traffic jams unscrew a connecting nut of fastening of the pipeline to a fuel nozzle and include a starter so that fuel began to follow from connection.